Wall cabinets with glass front doors are intended for installation in small offices and installations with low saturation of subscriber outlets, e.g. warehouses, production halls, etc. The cabinet is of split construction, i.e. after attaching the rear section to the wall, it is possible to open the front section for easy access to the inside of the cabinet and the equipment installed in it. The cabinet has four cable entry openings with metal plugs, two in the back wall, and one in each of the floor and ceiling. The cabinet has two ventilation openings protected by perforated mesh. One of these is pre-shuttered with a filter cap. A ventilation panel (with or without thermostat) with two fans mounted to the roof of the cabinet in place of the perforations is available. The cabinet is made of 1,25 mm thick steel sheet. The cabinets are available in the following configurations 6U, 10U, 15U and 18U. The width of the cabinet is 583mm and the depth is 525mm measured from the outer contour The usable depth measured from the front frame in its maximum position to the rear wall is 480mm.
